China manufacturer Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox Agv with Good quality

Product Description

Certifications

 

Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox AGV
PLANETX planetary reduce
AGV  reducer advantage:

AGV reducer is also a kind of planetary reducer. By changing the output mode of the planetary mechanism, we can convert the standard shaft output to the internal gear ring output, so as to achieve the purpose of outer ring rotation. The successful development of this product meets the requirements of similar products with the highest transmission efficiency value and the lowest axial length value. It successfully solves the shortcomings of AGV logistics trolley in limiting the axial size of deceleration installation and the large loss of transmission efficiency of ordinary reducer.
The minimum single-stage reduction of AGV reducer can be 2, the maximum speed ratio generally does not exceed 9, the common reduction ratio is 3, 4, 6, 9, and the number of reducer stages generally does not exceed 2, and the speed ratio does not exceed 50; Due to the adoption of planetary transmission mechanism, the rotary accuracy can be comparable to that of standard planets, up to 3 minutes of arc. The operating temperature can be between – 40 ºC and 120 ºC.
The transmission efficiency is high, the axial dimension is short, the structure is compact, and the AGV structure is simplified.
  company-HangZhou-PLT-Transmission-Equipment-Co-Ltd-.html

Reduction ratio  Rated output torque Rated input speed Maximum radial bearing capacity Maximum axial bearing capacity Full load efficiency Operating temperature Lubrication method Degree of protection Hub stress mode
15:1 120Nm 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90° Long term effect IP54 Double support
21:1 80Nm 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90° Long term effect IP54 Double support
30:1 60N 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90° Long term effect IP54 Double support
40:1  60N 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90°  Long term effect IP54 Double support
Customizable reduction ratio 3:1     4:1     6:1      9:1      15:1       21:1       28:1        30:1       40:1        42:1        60:1

HangZhou CHINAMFG Transmission Equipnenit Co,Ltd
is based on the global industrial automation field. it is
saies of planetary reducers, hollow rotary platforrres, 
a manufacturer specializing in R&D, production and
  and special reducers. It belongs to “National High-tech 
 
Enterprise”. The headquarters and production center are located in HangZhou City,ZheJiang Province, which is known as the “world factory”, and there are service centers and transit warehouses in ZheJiang . ZheJiang ,HangZhou and other places.
The company’s core team members have more than 10 years of experience in the transmission industry and gear processing industry, and are good at solving a variety of internal and external gears and processing solutions. The company has summed up a complete set of “transmission quality management system” to ensure the relative accuracy of each component after combination,and provide high pass rate and high efficiency guarantee for the whole machine to leave the factory. We use advanced computer software for design and demonstration,combined with years of experience in mechanical transmission and motion
control, to provide global motion and control solutions. Our products have the characteristics of high precision, large bearing torque, long life, low noise, stable operation, strong versatility and maintenance-free Quality is the foundation of enterprise survival. We provide the market with stable and high-quality products and provide more optimized automation
solutions. Always take “user demand” as the business purpose of the enterprise, take “scientific and
technological innovation” as the foundation of the company’s development, and implement the Iso
quality management system operation into all aspects of the company.
Our products are widely used in aerospace,CNC machine tools, cutting and welding equipment,textile printing and dyeing machinery packaging machinery, food machinerymedical machineryships,radardata communication systems,robots,robotic arms, composite materials equipmentprecision testing
Instruments, testing machines,plastic machinery, glass machinery,coal mining machinery,lifting machinery, metallurgical machinery,construction machinery and other fields.
The process of our pursuit of success is the process of continuous sublimation of our relationship with you. The success of the company is inseparable from the long-term support and help of many customers and friends. Facing the future, we will serve you more. HangZhou CHINAMFG Transmission Equipment Co.,Ltd. will go hand in hand with you to create brilliant!

Qualification certificate
Authoritative certification, guarantee of Xinnai
The company has long adhered to the business policy of “technical progress as the guide, quality improvement as the main line, fully optimize the overall quality of the enterprise, and then meet the needs of the society for development”.

Q: How to get a quick quote
A: Please provide the following information when contacting us

  1. Motor brand
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand
 

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Metal Processing
Match Machine: Spinning Equipment
Material: Metal
Processing Level: Precision Finishing
Customization:
Available

|

Customized Request

wheel pulley

What is the role of wheel pulleys in HVAC systems and air conditioning units?

Wheel pulleys serve important functions in HVAC systems and air conditioning units, contributing to their overall operation and efficiency. Here’s a detailed explanation:

1. Blower Motor Operation:

In HVAC systems and air conditioning units, wheel pulleys are utilized to drive the blower motor. The blower motor is responsible for circulating air through the system, facilitating the movement of conditioned air into the desired space. The wheel pulley, often connected to the motor shaft, transfers rotational motion from the motor to the blower wheel. This enables the blower wheel to spin and generate the necessary airflow for proper ventilation and temperature control.

2. Fan Speed Control:

Wheel pulleys play a role in controlling the speed of fans or blowers in HVAC systems. By employing pulleys of different sizes, the rotational speed of the blower wheel can be adjusted. A larger pulley size results in slower fan speed, while a smaller pulley size increases the speed. This allows for precise control of airflow and enables the HVAC system to adapt to varying cooling or heating requirements in different scenarios.

3. Belt-Driven Systems:

HVAC systems often utilize belt-driven mechanisms, where wheel pulleys are an integral component. A belt connects the motor’s pulley to the pulley on the blower wheel, allowing power transmission between the two components. Wheel pulleys ensure proper engagement with the belt, maintaining an effective grip and minimizing slippage. This reliable power transmission is crucial for the consistent operation of the blower motor and the smooth functioning of the HVAC system.

4. Tension and Alignment:

Wheel pulleys in HVAC systems help maintain proper tension and alignment of belts. Tensioning mechanisms, such as adjustable pulley positions or tensioners, are employed to ensure optimal tension in the belts. Proper tension prevents belt slippage and ensures that the belts remain tightly engaged with the wheel pulleys. Additionally, wheel pulleys may incorporate features like crowned surfaces or tracking guides to aid in belt alignment, reducing the risk of misalignment and optimizing the system’s performance.

5. Reduced Vibration and Noise:

Wheel pulleys contribute to the smooth and quiet operation of HVAC systems. They are often equipped with bearings or bushings that reduce friction and minimize vibrations. The smooth rotation of wheel pulleys reduces noise levels, ensuring a more comfortable and peaceful environment in buildings where the HVAC system is installed.

6. Maintenance and Replacement:

Proper maintenance and timely replacement of wheel pulleys are important in HVAC systems and air conditioning units. Regular inspection helps identify any wear, misalignment, or damage to the pulleys or belts, ensuring optimal performance and preventing potential failures. When necessary, damaged or worn wheel pulleys should be replaced to maintain the reliability and functionality of the HVAC system.

Overall, wheel pulleys play a significant role in HVAC systems and air conditioning units by facilitating blower motor operation, controlling fan speed, enabling belt-driven systems, maintaining tension and alignment, and contributing to a smooth and quiet operation. Their proper functioning and maintenance are essential for efficient air circulation and temperature control in various residential, commercial, and industrial settings.

wheel pulley

Can wheel pulleys be customized for specific machinery and equipment?

Yes, wheel pulleys can be customized to meet the specific requirements of machinery and equipment. Here’s a detailed explanation of how wheel pulleys can be customized:

1. Pulley Size and Diameter:

Wheel pulleys can be manufactured in various sizes and diameters to match the specific dimensions and space constraints of the machinery or equipment. Customizing the pulley size ensures proper fitment and optimal power transmission.

2. Material Selection:

Depending on the application and environmental conditions, the material of the wheel pulley can be customized. Common materials used for wheel pulleys include metals such as steel, aluminum, or cast iron, as well as high-strength plastics. The choice of material is based on factors such as load capacity, durability, corrosion resistance, and weight considerations.

3. Shaft and Bearing Design:

The shaft and bearing design of the wheel pulley can be tailored to suit the specific load requirements and operating conditions of the machinery or equipment. This involves selecting the appropriate bearing type, size, and lubrication method. Additionally, the shaft can be customized in terms of length, diameter, and keyway specifications.

4. Pulley Groove Profile:

The groove profile of the wheel pulley can be customized to match the specific type of belt, rope, or cable used in the power transmission system. Different profiles, such as V-shaped, round, or flat, can be machined into the pulley to ensure proper engagement and grip with the power transmission element.

5. Surface Coatings and Treatments:

In certain applications, wheel pulleys may require surface coatings or treatments to enhance their performance. Customizable options include corrosion-resistant coatings, wear-resistant treatments, or special finishes to reduce friction and improve overall efficiency.

6. Integration of Additional Features:

Depending on the machinery or equipment’s unique requirements, wheel pulleys can be customized to integrate additional features or components. For example, pulleys can be designed with built-in keyways, set screws, or flanges for easy installation and alignment. Customized pulleys can also accommodate specific belt tensioning mechanisms or belt tracking systems.

7. Balancing and Precision Machining:

For high-speed applications or machinery that demands precise operation, wheel pulleys can undergo customized balancing and precision machining processes. This ensures smooth operation, minimizes vibrations, and reduces wear on the power transmission system.

By offering customization options in terms of size, material, shaft design, groove profile, surface coatings, additional features, and precision machining, wheel pulleys can be tailored to meet the specific requirements of machinery and equipment. This customization capability allows for optimized performance, reliability, and efficiency in power transmission systems.

wheel pulley

What is a wheel pulley, and how is it used in mechanical systems?

A wheel pulley is a type of pulley that is specifically designed in the shape of a wheel. It consists of a circular disc with a groove or grooves along its circumference, which allows for the engagement of a belt or rope. Here’s a detailed explanation of what a wheel pulley is and how it is used in mechanical systems:

1. Function:

A wheel pulley is primarily used to transmit rotational motion and power between different components in a mechanical system. It serves as a connection point for a belt or rope, which is wrapped around the groove of the pulley. As the pulley rotates, the belt or rope moves along with it, transferring the motion and power to other parts of the system.

2. Power Transmission:

The main purpose of a wheel pulley is to facilitate power transmission. By connecting the pulley to a power source, such as an electric motor or an engine, and using a belt or rope, the rotational motion and power generated by the source can be transferred to other components or machines in the system. This enables the operation of various mechanical functions, such as driving conveyor belts, operating machinery, or lifting heavy loads.

3. Speed and Torque Regulation:

Wheel pulleys are also used to regulate the speed and torque in mechanical systems. By changing the size of the pulley or using pulleys of different diameters, the speed ratio between the input and output components can be adjusted. This allows for the control of rotational speed and the amplification or reduction of torque, depending on the specific requirements of the system.

4. Mechanical Advantage:

Wheel pulleys can provide mechanical advantage in certain applications. By utilizing a combination of pulleys, such as multiple pulleys of different sizes or incorporating a system of fixed and movable pulleys, mechanical advantage can be achieved. This can be beneficial in situations where a higher force is required to move or lift heavy objects, as the pulley system allows for the distribution of force over a larger area, reducing the effort needed.

5. Belt or Rope Engagement:

Wheel pulleys are designed with a groove or grooves along the circumference to ensure proper engagement of the belt or rope. This groove provides a secure grip on the belt or rope, preventing slippage and ensuring efficient power transmission. The groove profile may vary depending on the type of belt or rope being used, such as V-belts, flat belts, or round belts.

6. Applications:

Wheel pulleys are utilized in various mechanical systems across different industries. They can be found in machinery, automotive systems, conveyor systems, lifting equipment, and many other applications where rotational motion and power transmission are required.

7. Maintenance and Lubrication:

Proper maintenance and periodic lubrication of wheel pulleys are important to ensure their smooth operation and longevity. Regular inspection, cleaning, and lubrication help prevent wear, reduce friction, and maintain the efficiency of the pulley system.

Overall, wheel pulleys are essential components in mechanical systems, enabling power transmission, speed regulation, and mechanical advantage. They provide a reliable and efficient means of transferring rotational motion and power, contributing to the functionality and operation of various machines and equipment.

China manufacturer Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox Agv   with Good quality China manufacturer Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox Agv   with Good quality
editor by CX

2023-10-03