China Customized Aluminum Timing Belt Idler Pulley for Transmission Machine pulley alternator

Product Description


In addition to Loafer Pulley, we also create PU Flex Timing Belt/PU Truly Countless Timing Belt

*Polyurethane belt loop power,by a unique thermoset molding process.
*Large-quality polyurethane materials resistant to put on the belt and tear tesistant correct ties.
*One of the core wire to improve belt energy,tensile stregth,so that the belt has very good dimensional steadiness.
*Polyurethane electricity ring with tiny tolerances,can promise the precision of thickness and duration.
*All of the previously mentioned features make the ployurethane ring has a higher energy with the physical and chemical stability.
Polyurethane belt has the subsequent qualities:
*Mechanical properties                                                                *Chemical homes
 Positive suit,synchronous,running                                                   Resistant to aging,drinking water solution,UVUVA,anti-ozne
 Constant size,no publish-elongation                                              Working temperature:-30ºC-80ºC(short time could 
 Low noise                                                                                      withstand 110ºC)
 Wear resistant                                                                               Resistant against basic oils,fats and petrol
 Low-maintenance                                                                          Resistant to some acids
 Highly flexible
 Belt speeds up to 80m/s

This round PU timing belt especially             
suited for minimal load synchronous transmission,
this sort of as:place of work automation program and household appliances.

Associated Belt

1.Ring belt from the continuous metal core and the thermoplastic polyurethane substance,is a real no interface ring belt.
two.Ring belt to ensure the characteristics and operation below higher load,this energy transmission belt for higher-speed and higher load transfer.
three.Ring belt length may be from 1.700 to 22.000 meters.
four.Ring belt can be tailored according to customer’s requirements of different designs,these kinds of as:AT20,AT10,T10,T5,AT5,HTD8M,STD8M…..
*Ring belt particular processing:
  1.Tooth surface and nylon material
  2.Can be rolled again a special sample grinding and drilling
  3.can cover the back again of the belt thicking
About opening belt
*Opening belt completed with a continuous length,the center and the sides parallel to the wire main.Normal roll length is fifty or one hundred meters.
*Open up (PU) leather-based belt with a variety of diverse core selection,this sort of as kevlar core,very adaptable core(HF)large-overall performance(HP)and substantial toughness(HPF)
*Creation tolerance of modest reliable transmission and has a dimensional stability.The generation method or in the tooth and tooth incorporate a layer of nylon to make sure that applications managing in the unique characterstics of the identical.Also thicker layer of polyurethane in the belt or the back again of the pink plastic to stop corrosion or higher load.

Product Record
*Types of model to decide on
MXL

Spec. Teeth Spec. Enamel Spec. Teeth Spec. Tooth Spec. Tooth Spec. Teeth Spec. Tooth Spec. Teeth
26MXL 33 36MXL forty five 37MXL 46 38MXL forty eight 41MXL fifty one 46MXL fifty eight 53MXL sixty six 54MXL sixty seven
55MXL 70 56MXL seventy one 57MXL 72 58MXL 73 59MXL 74 60MXL seventy five 61MXL seventy six 63MXL seventy nine
64MXL eighty two 65MXL 83 71MXL 89 72MXL ninety 73MXL ninety two 74MXL ninety three 75MXL 95 76MXL ninety six
77MXL ninety seven 78MXL ninety eight 80MXL a hundred 81MXL  102   82MXL 103 84MXL one hundred and five 85MXL 106 86MXL 107
87MXL one hundred ten 88MXL 112 89MXL 114 92MXL 115 93MXL 119 94MXL 120 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL one hundred twenty five 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL one hundred forty 114MXL 143 115MXL one hundred forty four 116MXL one hundred forty five 120MXL 150 122MXL 153 124MXL 155 
126MXL 157 128MXL a hundred and sixty 132MXL one hundred sixty five 140MXL 175 143MXL 179 144MXL one hundred eighty 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL 190 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL two hundred
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL five hundred

T10 

Spec. Teeth Spec. Tooth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Enamel Spec. Enamel Spec. Tooth
T10*260 26 T10*300 30 T10*330 33 T10*370 37 T10*390 39 T10*four hundred forty T10*410 41 T10*440 44
T10*450 45 T10*460 46 T10*480 48 T10*500 fifty T10*510 51 T10*530 fifty three T10*540 fifty four T10*550 55
T10*560 fifty six T10*600 60 T10*610 61 T10*620 sixty two T10*630 sixty three T10*650 sixty five T10*660 66 T10*680 68
T10*690 sixty nine T10*700 70 T10*720 seventy two T10*730 seventy three T10*750 seventy five T10*780 seventy eight T10*800 80 T10*810 eighty one
T10*830 eighty three T10*840 84 T10*850 85 T10*860 86 T10*880 88 T10*890 89 T10*900 ninety T10*910 ninety one
T10*920 92 T10*950 95 T10*960 ninety six T10*970 ninety seven T10*980 ninety eight T10*one thousand one hundred T10*1571 a hundred and one T10*1050 a hundred and five
T10*1080 108 T10*1100 one hundred ten T10*1110 111 T10*1140 114 T10*1150 one hundred fifteen T10*1200 a hundred and twenty T10*1210 121 T10*1240 124
T10*1250 one hundred twenty five T10*1260 126 T10*1280 128 T10*1300 one hundred thirty T10*1320 132 T10*1350 one hundred thirty five T10*1360 136 T10*1390 139
T10*1400 a hundred and forty T10*1410 141 T10*1420 142 T10*1440 one hundred forty four T10*1450 145 T10*1460 146 T10*1500 150 T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 one hundred sixty T10*1640 164 T10*1700 one hundred seventy T10*1750 175 T10*1760 176 T10*1780 178
T10*1800 a hundred and eighty T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 two hundred T10*2571 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

H

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Enamel Spec. Enamel Spec. Enamel Spec. Teeth Spec. Teeth Spec. Teeth
200H forty 225H 45 250H fifty 260H fifty two 270H 54 280H fifty six 300H sixty 315H sixty three 330H sixty six
350H 70 390H seventy eight 420H 84 450H ninety 460H ninety two 470H 94 480H 96 510H 102 540H 108
560H 112 570H 114 600H 120 630H 126 700H 140 750H a hundred and fifty 900H one hundred eighty        

 T2.five

Spec. Teeth Spec. Enamel Spec. Enamel Spec. Teeth Spec. Tooth Spec. Teeth Spec. Tooth Spec. Enamel
T2.5*120 forty eight T2.5*one hundred forty five fifty eight T2.5*a hundred and sixty 64 T2.5*180 seventy two T2.5*182.five seventy three T2.5*two hundred eighty T2.5*215 86 T2.5*240 96
T2.5*245 98 T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.5*420 168 T2.5*500 200 T2.5*600 240
T2.5*650 260 T2.5*780 312 T2.5*950 380                    

AT5

Spec. Teeth Spec. Teeth Spec. Tooth Spec. Teeth Spec. Tooth
AT5*375 75 AT5*390 seventy eight AT5*455 ninety one AT5*490 ninety eight AT5*500 a hundred

AT10

Spec. Tooth Spec. Tooth Spec. Teeth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Enamel Spec. Teeth
AT10*five hundred 50 AT10*600 60 AT10*660 66 AT10*700 70 AT10*730 seventy three AT10*780 seventy eight AT10*800 800 AT10*840 eighty four
AT10*920 92 AT10*960 ninety six AT10*980 ninety eight AT10*1050 one hundred and five AT10*1080 108 AT10*1100 a hundred and ten AT10*1150 one hundred fifteen AT10*1200 one hundred twenty
AT10*1210 121 AT10*1250 a hundred twenty five AT10*1280 128 AT10*1300 one hundred thirty AT10*1350 one hundred thirty five AT1390 139 AT10*1400 one hundred forty AT10*1480 148
AT10*1600 one hundred sixty AT10*1700 170 AT10*1860 186 AT10*1900 a hundred ninety                

S3M

Spec. Enamel Spec. Tooth Spec. Teeth Spec. Tooth Spec. Enamel Spec. Teeth Spec. Tooth Spec. Teeth
S3M120 40 S3M144 forty eight S3M150 fifty S3M183 61 S3M192 64 S3M201 67 S3M210 70 S3M231 seventy seven
S3M237 79 S3M246 eighty two S3M315 one zero five S3M357 119 S3M418 one hundred forty S3M420 a hundred and forty S3M432 a hundred and forty four S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 a hundred and seventy S3M513 171 S3M519 173 S3M525 one hundred seventy five
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 200 S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

HTD3M

Spec. Tooth Spec. Teeth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Enamel Spec. Teeth Spec. Enamel
3M135 45 3M144 forty eight 3M171 fifty seven 3M174 58 3M177 59 3M189 63 3M195 sixty five 3M207 69
3M225 75 3M228 76 3M243 eighty one 3M255 eighty five 3M264 88 3M276 92 3M288 96 3M294 ninety eight
3M300 one hundred 3M312 104 3M315 105 3M324 108 3M336 112 3M345 one hundred fifteen 3M357 119 3M360 a hundred and twenty
3M366 122 3M375 125 3M384 128 3M402 134 3M420 140 3M423 141 3M435 one hundred forty five 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 one hundred sixty five 3M504 168
3M510 170 3M522 174 3M525 a hundred seventy five 3M537 179 3M540 a hundred and eighty 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

*We also have design :L/XL/XXL/T5/AT3/H/PK/PJ/PH/DMB/DT5/DR/PL/MB/DAT10/DT10/S2M/S5M/5M/HTD2M/HTD5M/HTD14M/HTD8M,or as your requirment to make new design but require to pay out product value,If you have no quantity,mentioned remember to!

Application 

About business
ZheJiang CZPT Transmission Equipment Co.,Ltd. 
Was proven in March 2004,have 16 years of manufacturing experience.Neighborhood in No. eleven, Lane 243, Jiugan Road, Sijing City, Xihu (West Lake) Dis. District, ZheJiang ,China.Principal offer in transmission belt and modular chain belt and so forth.manufacturing quantity more than 50000 pieces 1 year.all kinds of rubber substance,pvc and pu materials and so on.take specical creating as your requirment. We support personalized provider.and delivery time most fastest 1day according  to your orders.Organizations adhering to the “integrity,high quality,value,and service initial,steady innovation” company philosophy,dedicated to offer high high quality goods and large-high quality support for the buyer,the company continutes to broaden the scale of advancement,buyers during the region.

If you have intrigued,cost-free time to speak to me make sure you.

 
 

    
 

US $1-50
/ Piece
|
1 Piece

(Min. Order)

###

Certification: CE
Pulley Sizes: Custom
Manufacturing Process: Casting
Material: Alloy
Surface Treatment: Custom
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
26MXL 33 36MXL 45 37MXL 46 38MXL 48 41MXL 51 46MXL 58 53MXL 66 54MXL 67
55MXL 70 56MXL 71 57MXL 72 58MXL 73 59MXL 74 60MXL 75 61MXL 76 63MXL 79
64MXL 82 65MXL 83 71MXL 89 72MXL 90 73MXL 92 74MXL 93 75MXL 95 76MXL 96
77MXL 97 78MXL 98 80MXL 100 81MXL  102   82MXL 103 84MXL 105 85MXL 106 86MXL 107
87MXL 110 88MXL 112 89MXL 114 92MXL 115 93MXL 119 94MXL 120 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL 125 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL 140 114MXL 143 115MXL 144 116MXL 145 120MXL 150 122MXL 153 124MXL 155 
126MXL 157 128MXL 160 132MXL 165 140MXL 175 143MXL 179 144MXL 180 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL 190 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL 200
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL 500

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
T10*260 26 T10*300 30 T10*330 33 T10*370 37 T10*390 39 T10*400 40 T10*410 41 T10*440 44
T10*450 45 T10*460 46 T10*480 48 T10*500 50 T10*510 51 T10*530 53 T10*540 54 T10*550 55
T10*560 56 T10*600 60 T10*610 61 T10*620 62 T10*630 63 T10*650 65 T10*660 66 T10*680 68
T10*690 69 T10*700 70 T10*720 72 T10*730 73 T10*750 75 T10*780 78 T10*800 80 T10*810 81
T10*830 83 T10*840 84 T10*850 85 T10*860 86 T10*880 88 T10*890 89 T10*900 90 T10*910 91
T10*920 92 T10*950 95 T10*960 96 T10*970 97 T10*980 98 T10*1000 100 T10*1010 101 T10*1050 105
T10*1080 108 T10*1100 110 T10*1110 111 T10*1140 114 T10*1150 115 T10*1200 120 T10*1210 121 T10*1240 124
T10*1250 125 T10*1260 126 T10*1280 128 T10*1300 130 T10*1320 132 T10*1350 135 T10*1360 136 T10*1390 139
T10*1400 140 T10*1410 141 T10*1420 142 T10*1440 144 T10*1450 145 T10*1460 146 T10*1500 150 T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 160 T10*1640 164 T10*1700 170 T10*1750 175 T10*1760 176 T10*1780 178
T10*1800 180 T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 200 T10*2020 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
200H 40 225H 45 250H 50 260H 52 270H 54 280H 56 300H 60 315H 63 330H 66
350H 70 390H 78 420H 84 450H 90 460H 92 470H 94 480H 96 510H 102 540H 108
560H 112 570H 114 600H 120 630H 126 700H 140 750H 150 900H 180        

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
T2.5*120 48 T2.5*145 58 T2.5*160 64 T2.5*180 72 T2.5*182.5 73 T2.5*200 80 T2.5*215 86 T2.5*240 96
T2.5*245 98 T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.5*420 168 T2.5*500 200 T2.5*600 240
T2.5*650 260 T2.5*780 312 T2.5*950 380                    

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
AT5*375 75 AT5*390 78 AT5*455 91 AT5*490 98 AT5*500 100

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
AT10*500 50 AT10*600 60 AT10*660 66 AT10*700 70 AT10*730 73 AT10*780 78 AT10*800 800 AT10*840 84
AT10*920 92 AT10*960 96 AT10*980 98 AT10*1050 105 AT10*1080 108 AT10*1100 110 AT10*1150 115 AT10*1200 120
AT10*1210 121 AT10*1250 125 AT10*1280 128 AT10*1300 130 AT10*1350 135 AT1390 139 AT10*1400 140 AT10*1480 148
AT10*1600 160 AT10*1700 170 AT10*1860 186 AT10*1900 190                

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
S3M120 40 S3M144 48 S3M150 50 S3M183 61 S3M192 64 S3M201 67 S3M210 70 S3M231 77
S3M237 79 S3M246 82 S3M315 105 S3M357 119 S3M418 140 S3M420 140 S3M432 144 S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 170 S3M513 171 S3M519 173 S3M525 175
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 200 S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
3M135 45 3M144 48 3M171 57 3M174 58 3M177 59 3M189 63 3M195 65 3M207 69
3M225 75 3M228 76 3M243 81 3M255 85 3M264 88 3M276 92 3M288 96 3M294 98
3M300 100 3M312 104 3M315 105 3M324 108 3M336 112 3M345 115 3M357 119 3M360 120
3M366 122 3M375 125 3M384 128 3M402 134 3M420 140 3M423 141 3M435 145 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 165 3M504 168
3M510 170 3M522 174 3M525 175 3M537 179 3M540 180 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

###

US $1-50
/ Piece
|
1 Piece

(Min. Order)

###

Certification: CE
Pulley Sizes: Custom
Manufacturing Process: Casting
Material: Alloy
Surface Treatment: Custom
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
26MXL 33 36MXL 45 37MXL 46 38MXL 48 41MXL 51 46MXL 58 53MXL 66 54MXL 67
55MXL 70 56MXL 71 57MXL 72 58MXL 73 59MXL 74 60MXL 75 61MXL 76 63MXL 79
64MXL 82 65MXL 83 71MXL 89 72MXL 90 73MXL 92 74MXL 93 75MXL 95 76MXL 96
77MXL 97 78MXL 98 80MXL 100 81MXL  102   82MXL 103 84MXL 105 85MXL 106 86MXL 107
87MXL 110 88MXL 112 89MXL 114 92MXL 115 93MXL 119 94MXL 120 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL 125 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL 140 114MXL 143 115MXL 144 116MXL 145 120MXL 150 122MXL 153 124MXL 155 
126MXL 157 128MXL 160 132MXL 165 140MXL 175 143MXL 179 144MXL 180 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL 190 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL 200
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL 500

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
T10*260 26 T10*300 30 T10*330 33 T10*370 37 T10*390 39 T10*400 40 T10*410 41 T10*440 44
T10*450 45 T10*460 46 T10*480 48 T10*500 50 T10*510 51 T10*530 53 T10*540 54 T10*550 55
T10*560 56 T10*600 60 T10*610 61 T10*620 62 T10*630 63 T10*650 65 T10*660 66 T10*680 68
T10*690 69 T10*700 70 T10*720 72 T10*730 73 T10*750 75 T10*780 78 T10*800 80 T10*810 81
T10*830 83 T10*840 84 T10*850 85 T10*860 86 T10*880 88 T10*890 89 T10*900 90 T10*910 91
T10*920 92 T10*950 95 T10*960 96 T10*970 97 T10*980 98 T10*1000 100 T10*1010 101 T10*1050 105
T10*1080 108 T10*1100 110 T10*1110 111 T10*1140 114 T10*1150 115 T10*1200 120 T10*1210 121 T10*1240 124
T10*1250 125 T10*1260 126 T10*1280 128 T10*1300 130 T10*1320 132 T10*1350 135 T10*1360 136 T10*1390 139
T10*1400 140 T10*1410 141 T10*1420 142 T10*1440 144 T10*1450 145 T10*1460 146 T10*1500 150 T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 160 T10*1640 164 T10*1700 170 T10*1750 175 T10*1760 176 T10*1780 178
T10*1800 180 T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 200 T10*2020 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
200H 40 225H 45 250H 50 260H 52 270H 54 280H 56 300H 60 315H 63 330H 66
350H 70 390H 78 420H 84 450H 90 460H 92 470H 94 480H 96 510H 102 540H 108
560H 112 570H 114 600H 120 630H 126 700H 140 750H 150 900H 180        

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
T2.5*120 48 T2.5*145 58 T2.5*160 64 T2.5*180 72 T2.5*182.5 73 T2.5*200 80 T2.5*215 86 T2.5*240 96
T2.5*245 98 T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.5*420 168 T2.5*500 200 T2.5*600 240
T2.5*650 260 T2.5*780 312 T2.5*950 380                    

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
AT5*375 75 AT5*390 78 AT5*455 91 AT5*490 98 AT5*500 100

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
AT10*500 50 AT10*600 60 AT10*660 66 AT10*700 70 AT10*730 73 AT10*780 78 AT10*800 800 AT10*840 84
AT10*920 92 AT10*960 96 AT10*980 98 AT10*1050 105 AT10*1080 108 AT10*1100 110 AT10*1150 115 AT10*1200 120
AT10*1210 121 AT10*1250 125 AT10*1280 128 AT10*1300 130 AT10*1350 135 AT1390 139 AT10*1400 140 AT10*1480 148
AT10*1600 160 AT10*1700 170 AT10*1860 186 AT10*1900 190                

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
S3M120 40 S3M144 48 S3M150 50 S3M183 61 S3M192 64 S3M201 67 S3M210 70 S3M231 77
S3M237 79 S3M246 82 S3M315 105 S3M357 119 S3M418 140 S3M420 140 S3M432 144 S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 170 S3M513 171 S3M519 173 S3M525 175
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 200 S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

###

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
3M135 45 3M144 48 3M171 57 3M174 58 3M177 59 3M189 63 3M195 65 3M207 69
3M225 75 3M228 76 3M243 81 3M255 85 3M264 88 3M276 92 3M288 96 3M294 98
3M300 100 3M312 104 3M315 105 3M324 108 3M336 112 3M345 115 3M357 119 3M360 120
3M366 122 3M375 125 3M384 128 3M402 134 3M420 140 3M423 141 3M435 145 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 165 3M504 168
3M510 170 3M522 174 3M525 175 3M537 179 3M540 180 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

###

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.

China Customized Aluminum Timing Belt Idler Pulley for Transmission Machine     pulley alternatorChina Customized Aluminum Timing Belt Idler Pulley for Transmission Machine     pulley alternator
editor by czh 2022-12-23